How to use a pressure washer

Pressure washers are used in the home for a variety of reasons.

Cleaning large surfaces like a deck, driveway or the outside of a house would take a long time to do with a hand. A portable pressure washer with water tank are one of the tools that combine the natural cleaning power of water and high pressure to deliver a thorough washing in less time.

As with all tools, in order to get the most out the pressure washer you must understand how it works. This guide can teach you the fundamentals of using a pressure cleaner.

How does a pressure washer work?

How does a pressure washer obtain its pressure

A pressure washer makes use of the water from an ordinary garden hose. The hose is connected to the machine. A high-speed pump inside the unit elevates the pressure of the water until it can be used to create a highly abrasive stream. The strength of the spray is controlled by a nozzle.

What are the different types of pressure washer nozzles?

The nozzles are what provide the proper cleaning power. It is possible to find five basic nozzles that are differentiated by how concentrated on the spray.

The red nozzle produces the appearance of a powerful, thin jet of water, which is ideal for the most difficult staining.

Yellow nozzles are one step down in intensity , and is the best choice for removing paint and mildew.

The green nozzle can be described as a general purpose cleaning nozzle.

The white nozzle is the biggest spray, which makes it best for lighter-duty cleaning and washing.

It is the sole nozzle that is able to be used with soap. In addition, you can buy an turbo sprayer or an multipurpose nozzle or an surface cleaning attachment which is great to clean patios, decks and much more.

The steps to take when using the best pressure washer sandblasting kit

While the best directions to use your pressure washer must be included with your purchase, this general outline will give you an overview of the process.

1. Clean the area you’ll be cleaning to make sure that all delicate items have been taken away. Clean up dirt and debris, and cover any items that cannot be moved using an the tarp.
2. Be sure to look around the area, so that you are aware of outlets, windows and vents.
3. Select and connect the proper nozzle to the task.
4. The garden hose should be connected to your pressure washer, and give the machine a thorough inspection to make sure everything is securely fastened and this machine is completely safe to use.
5. Don’t forget to wear safety goggles to stop debris from falling back into your eyes.
6. The water supply should be turned on via the outdoor water spigot.
7. Press the trigger on the wand until you release any air pressure that may be in the line.
8. Follow your particular machine’s instructions to start your machine.
9. Before use to spray, check the strength that the spray is able to emit in a safe zone and adjust as necessary.
10. Now is the time to begin cleaning.
11. After shutting off the pressure washer and shutting off the water supply, make sure that you press the trigger so that any pressure water to escape prior to disconnecting the hose and other components.

Tips for pressure washing

• Pressure washers require lots of water. Be sure to provide enough drainage in the area you’re working, or else things could quickly become messy.
• The most important aspect of cleaning safely is using the correct nozzle for the job. Be careful, as the wrong nozzle could damage siding and wood.
• Avoid spraying windows, painted surfaces, outdoor fixtures and electrical lines.
• As close you get to the surface, the more thoroughly the pressure washer will cleanse. Always begin cleaning from a distance, several feet away. If you’re looking for greater power, gradually move toward the area you’re cleaning.
• Don’t apply pressure washers when you’re on the ladder.
• When cleaning vertically, you should move between top and bottom, in a side-to-side pattern.
• Small areas of work with clearly stated objectives.
• If you are exhausted, take a break.