Homeowners benefit from high-efficiency air conditioning systems in a variety of ways, including a more pleasant home. However, you notice that it isn’t working properly at some point. What could be causing it?
Find out what aspects impact the overall performance of your air conditioner.
The Unit’s Dimensions
The size of your HVAC system has a significant impact on its performance. Larger air conditioners will quickly cool or warm your home, while smaller units will struggle to fulfill your temperature requirements.
Furthermore, an air conditioning system that is overly large can lead it to cycle on and off, wasting energy. Contact your local expert for air conditioning service in Grand Prairie, TX.
Insufficient Airflow
The airflow of your unit is affected by several factors. Dirty condenser coils, for example, restrict airflow and reduce the cooling efficiency. As dust and other particles are removed from the air, the filter becomes dirty over time, reducing airflow.
Another issue to address is a condenser unit that is clogged by impediments such as leaves. To remove dirt and dust from the coils, you should clean them at least once per season. You can rely on your nearest HVAC pros for air conditioning service in Grand Prairie, TX
Air Leaks
Air leaks might be caused by cracks surrounding windows and doors, roof damage, or inadequately sealed pipes and ducts. It impacts the humidity and temperature of your indoor air, as well as the efficiency of your air conditioner.
Inadequate Insulation
Under-performing insulation has an impact on the efficiency of your air conditioner, too. It permits heat to pass between parts of your home and the outdoor air, raising the temperature and requiring a significant amount of effort from your unit to attain the desired cooling level.
Bad Ductwork
Air ducts to transport air throughout your home. So, if they’re blocked, leaking, unclean, or in bad shape, your air conditioner’s overall effectiveness will suffer. To ensure that your ducts perform their function properly, remove any excessive accumulation and patch any holes. Allow an HVAC specialist to diagnose your ducting for potential concerns and quality air conditioning service in Grand Prairie, TX.
Load Cooling
Your system’s cooling load is determined by the size of the area to be cooled, the position of the unit, the heat generated within, and other important parameters. The bigger the cooling load, the more difficult it is for your air conditioner to maintain a consistent temperature.
Too Many Debris on Your Outdoor Unit
Debris around the exterior unit can’t be avoided, and it has an impact on your system’s efficiency. It’s significant to maintain a clean and debris-free unit at all times. Foliage and bushes must not obstruct airflow and allow ample breathing space for your unit.
Filters for Dust in the Air
Some households still do not consider filter replacement to be a necessary activity. This should not be the case, as you are reducing the efficiency of your unit. To keep airflow moving and eliminate dust, change the filters every month or every two months.
The Air Conditioning Unit’s Age
Another clear explanation for your air conditioner’s poor performance is its age. Models that are more than twenty years old may be less energy efficient. The HVAC system loses efficiency over time as well.
Problems with the Thermostat
All air conditioning equipment relies on the thermostat setting. The main problem here is insufficient cooling, primarily caused by a broken or improperly set thermostat. You should replace the battery, if necessary.
Your cooling system needs reliable A/C experts to guarantee quality air conditioning projects for your home or office. Spencer Air Conditioning and Heating have the best professionals to ensure your air conditioner is in the best condition all summer. Contact their experts at 972-446-2665.w